|
 |
|
FEATURES
AUTOMEG/SUBMEG
Three year warranty
Solid state 12 pin plug-in electronics module
Simple low cost installation
May be operated on 24 volts DC
Test insulation for 10 seconds prior to starting
(or allows idle motor to be monitored continuously)
Emergency by-pass switch and motor reset
(security seal on by-pass switch, submeg only)
Variable insulation trip values
Prevents motor from starting if one (1) megohm or less
Can be easily retrofitted into existing control panels
Adaptable to telemetering
Monitors repaired motors and generators
Monitors cable entry leakage (submersible)
Visual indicators for Power, 500 Volts DC & Low Meg
Eliminates manual testing
Early warning system for moisture can prevent burnouts
Tests motor before starting after power failure
Allows repairs to be scheduled
Optional resistance values available
500 volts DC LED
Test button for internal circuitry
|
| |
|
• 352.742.2227/voice • 352.742.1162/fax • jhorvath@automeg.com •
• Automeg, Inc. • 12626 Double Run Ranch • Astatula, Florida 34705 •
| |
|
| | ©Copyright 2010 Automeg, Inc.
|
|
| |